Practix Laminator System Model OK300, 2015 yr.

0 Item(s) - My Account
	Search
Advanced Search

(864) 847-7757

Home

Practix Laminator System Model OK300, 2015 yr.
Item Number	18417
Quantity	1
Machine	Practix Laminator System Model OK300, 2015 yr.
Description	Gapped Plate Laminator System purchased new in 2015 from Practix. Maximum working width of complete system 65" (1650mm) Maximum outside roll diameter 65" (1650mm) both unwind and rewind All unwinds/rewinds set up for 3" cores Allowable material thickness of 2mm-110mm PSA maximum roll diameter 25" (635mm) Maximum roll weight not to exceed 600 pounds Speed of machine 1-40 feet per minute Power 240V/3Phases/60Hz Unwind with two PSA Unwinds Unwind with web guide system; 5" correction from center (10" total); up to 5" thick PSA unwinds: 1 unwind to deliver PSA to the underside of the material; 1 unwind to deliver on the top ply of PSA; Each unwind with pneumatic clutch/brake to control tension Portable table 62" wide and 100" long to be used for material in sheets Laminator Practix Model OK-300 Teflon coated fiberglass belt to carry the product through the laminating process This belt is 0.018" (0.36mm) thick 1 lower heating platen 2 upper heating platens Each heater platen with three-zone heat control The bottom heater assembly is fixed The upper platens are gappable from 2 mm up to 110 mm The front and back of each of the heater platens can be adjusted independently of each other The movement of the upper heating plates is achieved with a gear motor and an Acme thread The movement is controlled by the HMI The heating platens is constructed from 20 mm aluminum 6061 plate The bottom plate measures 55" long x 74" wide The upper heaters platens measure 40" x 74" Silicone coated calendar rollers that travels with the upper heater platens The lower pressure roller is fixed The upper pressure roller can be adjusted In-between the two upper heating platens are 2 unwinds and 1 rewind with pneumatic clutches/brakes This allows for addition of another substrate e.g., aluminum foil Stop, jog and run button in the area in front of each laminating section This allows the operator to manage the set up on start-ups by themselves E stops located at convenient locations Loading areas with trip wire and safety gate that stop the machine in the event something trips it Rewind system 2 rewinds Each with web guide system; 5" correction from center (10" total); up to 5" thick Human Machine Interface Control (HMI) 15-inch touch screen control with Mitsubishi controls. Can store up to 1000 recipes. Laminated mostly foams with pressure sensitive adhesive (PSA). This equipment is capable of double-face lamination. For instance, PSA on one face, foil on the other face, 1 pass. The laminator is disconnected and dismantled in 3 sections: unwind section, rewind section and the main section, the laminator itself with its control panel.
Quote

Please feel free to Contact Us with any
Questions or Equipment Inquiries. Thank You!

Contents of this web site and all original text and images therein are copyright ©2002- by Allstates Textile Machinery, Inc. All rights reserved. The material on this site may not be copied, reproduced, downloaded, distributed, transmitted, stored, altered, adapted, or otherwise used in any way without the express written permission of the owner.
Website Development by Practical Business Systems